Build your own record player

diy turntable diagram
In my quest for a great sounding stereo and my annoying need to build things I have decided to build my own turntable. Luckily my friend Mark, microelectronics expert extraordinaire, will be teaching me the finer points of circuitry. I will be handling the sourcing, fabrication, and/or assembly of the plinth, bearing, and tonearm. This is a very exciting project for me because I have a limited knowledge when it comes to creating my own circuits. This is one of the last nagging things that I have been dying wrap my head around. More to come as the project progresses. As always I will delving further into the details on my wiki.

Share:
  • Facebook
  • TwitThis
  • Digg
  • del.icio.us
  • Google
  • Reddit
  • StumbleUpon
  • Technorati
  • E-mail this story to a friend!

6 Responses to “Build your own record player”

  1. Jonny Rash Says:

    You should hook into the car with super duper shock protection.

  2. doug Says:

    If you get too deeply into this, well…here’s an example what _can_ happen:

    http://www.teresaudio.com/certus/

  3. John Says:

    I’ve seen their work before and its crazy! For that price it better sound like a concert hall!

  4. Sourcing parts for the DIY record player | John Clarke Mills' Blog Says:

    [...] few months back I started sketching out plans for a do-it-yourself record player. Since then, not much has gone on due to my friend the electronics expert being out of town so I [...]

  5. Mark Says:

    Hi can you post all what you did to build this turntable. Very interesting !

  6. John Says:

    Unfortunately I have not finished it yet. All the other projects you see here have taken precedence. I will definitely make follow posts once that project continues.

Leave a Reply