Sourcing parts for the DIY record player

A few months back I started sketching out plans for a do-it-yourself record player. Since then, not much has gone on due to my friend the electronics expert being out of town so I decided to source some parts. I turned to a Chinese company called diyhifisupply.com. China you say? Well, over the past few years China has really become a key player in the DIY world of high fidelity. They are creating high quality components a great prices from the platter you see below to oil filled caps, tubes, and other various parts.



This platter was laser cut out of 40mm thick acrylic at a final diameter of 298mm. Its truly is a beautiful piece of work. The markings on the platter are for timing it with a strobe. Below is a photo of the bearing that I ordered along with it. It too is a very nicely machined piece of work with a self-oiling design using rifles to push the oil back up to the bearing. When everything is all connected together it turns very smoothly.

This entry was posted on Monday, May 12th, 2008 at 1:48 pm and is filed under Electronics, Audiophile. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.